无人机遥控驾驶关键技术研究与飞行品质分析

无人机遥控驾驶方式相对程控方式来说,在时间延迟、情景遥现、数据链性能优化以及飞行控制等方面的要求较高,而这些因素也成为了困扰无人机遥控驾驶发展和应用的关键.借鉴无人机技术验证平台地面闭环试验的结果,以时间延迟、数据链路性能为重点针对无人机遥控驾驶所面临的各种关键技术难点进行了深入的分析、研究,提出了合理的关键技术解决方...     

Progressive prediction method for failure data with small sample size

The small sample prediction problem which commonly exists in reliability analysis was discussed with the progressive prediction method in this paper.The modeling and estimation procedure,as well as the...     

一种信道系数服从高斯分布的8PSK信号信噪比盲估计算法

信噪比（SNR,Signalto Noise Ratio）是衡量通信系统性能的重要指标。针对传统信噪比估计算法要求利用训练序列或一帧数据范周内信道系数恒定等问题,提出了一种8PSK信号在信道系数服从高斯分布的衰落信道下肯信噪比估计算法。该算法取接收信号实部或虚部数值运算构成中间观测量,理论分析8PSK信号经过衰落信道后...     

航空发动机整机试验性能故障诊断系统设计

以航空发动机整机试验数据为研究对象,建立了1套气路性能故障诊断系统。该系统可对在研制和生产过程中的试验结果进行气路性能故障诊断分析;在分析发动机台架试车特点的基础上,阐述了该系统的设计功能和总体流程逻辑,并介绍了一些功能模块的流程设计;最后就系统的发展进行了讨论。经过带噪声的数值试验和真实试验数据验证,所建立的故障诊断系统诊断有效。     

双惯导自主定位系统方案探讨

介绍了双惯导定位系统的组成、功用和数据融合方式基本模式,提出了三种定位方案并进行了比较分析,阐述了利用车载惯导对弹上惯导的验证性能,通过双惯导互为备份使用使武器系统的机动性和生存能力得到提高.     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

Changes in hyperspectral reflectance signatures of lettuce leaves in response to macronutrient deficiencies

The adaptation of specific remote sensing and hyperspectral analysis techniques for the determination of incipient nutrient stress in plants could allow early detection and precision supplementation for remediation, important considerations for minimizing mass of advanced life support systems on space station and long term missions. This experiment was conducted to determine if hyperspectral reflectance could be used to detect nutrient stress in Lactuca sativa L. cv. Black Seeded Simpson. Lettuce seedlings were grown for 90 days in a greenhouse or growth chamber in vermiculite containing modified Hoagland’s nutrient solution with key macronutrient elements removed in order to induce a range of nutrient stresses, including nitrogen, phosphorus, potassium, calcium, and magnesium. Leaf tissue nutrient concentrations were compared with corresponding spectral reflectances taken at the end of 90 days. Spectral reflectances varied with growing location, position on the leaf, and nutrient deficiency treatment. Spectral responses of lettuce leaves under macronutrient deficiency conditions showed an increase in reflectance in the red, near red, and infrared wavelength ranges. The data obtained suggest that spectral reflectance shows the potential as a diagnostic tool in predicting nutrient deficiencies in general. Overlapping of spectral signatures makes the use of wavelengths of narrow bandwidths or individual bands for the discrimination of specific nutrient stresses difficult without further data processing.     

一种自旋稳定卫星姿态传感器数据异常的诊断方法

针对自旋稳定卫星遥测数据异常时,故障类型和故障源难于辨识的问题,提出一种数据驱动的故障诊断新思路.该方法提出将卫星姿态与传感器之间固有冗余关系是否保持作为判断故障类型的依据,并利用主成分分析把这种关系通过测量空间的特征值进行量化,监测特征值之间相应比例的变化实施判定;借助正交子空间的结构分析,选择SPE统计量进行故障检测和故障源的定位.在遥测数据的基础上模拟风云某型气象卫星的不同故障模式,并应用本文方法进行分析,结果表明,该方法克服了传统贡献图方法无法判别故障类型的缺点,可以实现对故障的正确诊断.     

利用热平衡试验稳态数据修正对接机构热模型

根据热平衡试验数据与计算结果的比较,分析两者存在差异的原因,用热平衡试验稳态工况数据修正对接机构热模型中的单元划分和热网络方程。研究了对热网络方程修正的方法,基于参数化和节点群概念改进参数化节点群整合方法,以明显减少需修正系数的数量,并与分级修正和局部修正综合,提高热网络修正方法的实用性。算例表明：通过热模型修正使温度计算值与试验值的偏差达到允许的要求,表明该热模型修正方法有效。     

多源图像融合技术的发展与军事应用研究

多源图像融合能根据各波段传感器获得信息的互补性和冗余性,综合多个传感器的信息,获取对同一目标或场景全面而详尽的表述,从而得出更为准确、可靠的结论.首先分析了多源图像融合的主要研究内容,进而探讨了发展现状和存在的问题,在此基础上,总结了图像融合中常用的传感器和应用方向.